Click image to view full size image
Clamp on ultrasonic flow transmitter high accuracy for oil liquid meter
Introduction
FT101 is a wall-mount, clamp- on type ultrasonic flow meter which use the transfer time technology. Clamp on type ultrasonic flow meter is easy to install and no need to cut off the pipe, that saves you lots of troubles and cost. At the same time FT101 has our unique calculate software to ensure the high accuracy and low velocity response.
FT101 ultrasonic flowmeter widely application in oil industry, water treatment, pure water, chemical and etc,.
FT101 could add the RTD model and temperature sensor become an energy meter to monitoring the energy use, help to save the energy.
Specification
| Performance | |
| Flow range | ±0.09ft/s ~ ±40ft/s (±0.03m/s ~ ±12m/s) |
| Accuracy | ±0.5% of reading (for ±1.5ft/s~±40ft/s) |
| Repeatability | 0.15% of measured value |
| Linearity | ±0.5% |
| Pipe size |
1"to 200" (25mm to 5000mm Pipe size under 1” is an option ) |
| Function | |
Outputs |
Analog output: 4~20mA, max load 750Ω. Pulse output: 0~9999Hz, OCT, (min. and max. frequency is adjustable) Relay output: SPST, max 1Hz,(1A@125VAC or 2A@30VDC) |
| Communication RS232&RS485 | |
| Memory | TF card (Max 4G) |
| Power supply | 90 to 245 VAC, 48 to 63 Hz. Or 10 to 36VDC |
| Display | 240*128 back lit LCD |
| Temperature |
Transmitter: -40℉~140℉(-40℃~60℃ Transducer: -40℉~176℉(-40℃~80℃,standard) |
| Humidity | Up to 99% RH, non-condensing |
| Physical | |
| Transmitter | IP65 |
| Transducer |
IP68 Encapsulated design Double-shielded transducer cable Standard/maximum cable length:30ft/900ft(9m/274m) |
http://www.flowtmeter.com/